About andrewdillon

andrewdillon · 04-18-2008

Hello,I am trying to get NAT to work on a 7613 w/sup720 and am having some unexpected results.IOS Version 12.2(18)SXF7MSFC3 Sup720Here is the config:interface GigabitEthernet9/44 ip address X.X.100.1 255.255.255.0 ip nat outside spanning-tree portfas...

andrewdillon · 04-24-2008

The portfast was leftover from a previous role this interface had. I removed it on both and still no luck.You do have to execute the no switchport command before you assign an IP address to an interface. Both of the interfaces are up and can be reach...

andrewdillon · 04-24-2008

Yes, this router has a full BGP route table. The destination network is definately known. I can ping the address from the router.

andrewdillon · 04-24-2008

I do not have a static route but there is a local route (directly connected).1#sho ip route 192.168.100.0Routing entry for 192.168.100.0/24 Known via "connected", distance 0, metric 0 (connected, via interface) Routing Descriptor Blocks: * directl...

andrewdillon · 04-24-2008

That's correct, I cannot hit any external addresses from the inside network.

andrewdillon · 04-24-2008

You can choose an interface (with an ip address assigned to it) or a pool. I have tried both ways...no luck.

Member Since	‎09-08-2006 05:40 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

NAT Configuration Issue 7613 - Sup720

Re: NAT Configuration Issue 7613 - Sup720

Re: NAT Configuration Issue 7613 - Sup720

Re: NAT Configuration Issue 7613 - Sup720

Re: NAT Configuration Issue 7613 - Sup720

Re: NAT Configuration Issue 7613 - Sup720