About aaronsj

aaronsj · 09-07-2007

I need help figuring out a problem that is plaguing our network. I'll try to be as brief as possible. Please see the attached file for our setup.Basically, I can pass TCP traffic just fine using iperf, I get about 67Mbps throughput. But as soon as I ...

aaronsj · 07-20-2007

Please forgive me if this is a common question in the VoIP community, I have very little exposure to the subject. I have two T1s that I want to run MLP on, but the bundle will also then carry our VoIP traffic. Are there known issues with this combo, ...

aaronsj · 07-19-2007

We have a typical T1 bundle via PPP Multilink. We bundle two T1s together and we do this seventeen times over to our local offices and it works great on most links. However, a couple are problem links where only one T1 is active in the bundle. As for...

aaronsj · 11-01-2006

During preliminary testing of an ACL I intend to implement on a small-scale business network, I added the statement:"deny icmp host 192.168.3.51 host 192.168.1.1 echo" and found that it did indeed kill my echos, but I also found that my Telnet sessio...

aaronsj · 02-26-2008

Our problem was due to a secondary ip address configured on the router interface. Basically, there were two networks on one 100Mbps interface which was causing it to overload and drop packets under too full a load. I moved our users to the same netwo...

aaronsj · 07-20-2007

Do I need to create a virtual interface for that or can QoS be applied to the multilink xxx interface?

aaronsj · 07-20-2007

Brian,Thank you for this info. I will probably do this sometime down the road, we aren't changing hostnames again for a while (or forever hopefully!) but I think it worthwile to do as good preventive maintenance. Thanks again.

aaronsj · 07-19-2007

Rick,Thanks for your post. I actually was able to pinpoint the problem. Apparently, when the Multilink interface was initally configured, it grabbed the distant router's hostname for the multilink name. Recently, we changed hostnames on the routers t...

aaronsj · 01-03-2007

Thanks for your post. I will have to look into Private VLANs and do some research, thanks for the suggestion. I am familiar with VLAN Access-Maps so maybe that will be an option as well. I'm curious now that you said that you can restrict device to d...

Member Since	‎09-14-2006 03:25 AM
Date Last Visited	‎06-26-2019 12:04 AM
Posts	11

User Statistics

User Activity

the microsoft-ds tcp retransmission phantom

PPP MLP and VoIP Compatibility

T1 PPP Multilink and LCP Negotiation

ICMP Echo -> A Telnet Dependency?

Re: the microsoft-ds tcp retransmission phantom

Re: PPP MLP and VoIP Compatibility

Re: T1 PPP Multilink and LCP Negotiation

Re: T1 PPP Multilink and LCP Negotiation

Re: Can't view company website