I use a GRE multipoint tunnel interface for dial backup catcher. What I want to do is apply QOS to the incoming GRE tunnels in catcher. Is there a way to dynamicaly apply QOS to a multipoint tunnel when it is formed? I currently want the same QOS ...
Is there a way from the Rommon prompt to boot from the second image in Flash ? I have a 2651XM and the first image is corrupted, but I believe the second image is ok.Thanks, Gardner
I want to use DSL for backup of my MPLS network. I plan to use an external ethernet connected device for DSL access. I plan to use a GRE tunnel over the DSL connection. Can I use dialer watch to bring up the tunnel interface?
In ACS V3.3 I have an admin group.In the TACACS+ Settings I have configured , shell exec and privilege level 15, but when the users log into the router they get a level of one. Is ther another parameter I am missing?
Sankar I have the answer>>>>rommon 1 > devDevices in device table: id name flash: flashrommon 2 > dir flash: File size Checksum File name 5571972 bytes (0x550584) 0xd7b5 c2600-i-mz.122-29a.bin 5548272 bytes ...
Sankar, I will open a TAC case. Most likley things have changed and I haven't found any documentation that explains it. Thanks for your help, now I know I am not crazy. Gardner
Sankar, Attached is what I get when I follow your procedure. There seems to be no way to execute the boot comand. If I do a reset, i wind up with the same results.
Sankar, What I mean is that when I enter a boot command the router returns the message "Please reset before booting'. So you cannot use the boot command. Have you tried it on a router? Gardner
I tried the 'boot'commands, but the message is always 'reset the router first' which boots the router from the first code load. I don't see how to enter the 'boot' command on it's own?Gardner