About CT_Eagle1

CT_Eagle1 · 10-31-2006

I have successfully configured a VLAN on a Cisco 2621 router using the following settings:interface FastEthernet 0/1.7encapsulation dot1Q 7ip address 192.168.7.1 255.255.255.0interface FastEthernet 0/1.8encapsulation dot1Q 8ip address 192.168.8.1 255...

CT_Eagle1 · 11-01-2006

I think I have found the problems. 1 - I had the incorrect IP address for the default gateway on the switch. After I entered the correct IP address, I was able to communicate between VLAN 9 and VLAN 7. I will not be able to test VLAN 8 until later on...

CT_Eagle1 · 10-31-2006

Thank you for your reply.I did a 'no shut' on the 1.9 subinterface and that did not cure the problem.I cannot ping 172.16.30.1 from either 1.7 or 1.8.The following are the results of "show ip route" on the router:C 192.168.8.0/24 is directly conne...

Member Since	‎10-31-2006 07:27 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	3

User Statistics

User Activity

Cisco2621 VLAN issue

Re: Cisco2621 VLAN issue

Re: Cisco2621 VLAN issue