About lindaramdani

lindaramdani · 12-19-2006

I got some problems with DHCP relay, I hope somone can help me out! I've set up the environment in my lab and get the same result:* Client (set to DHCP)* Router 1 (Cisco 871) (LAN IP-add (VLAN1): 1.1.1.1/8)* Router 2 (Cisco 871) (LAN IP-add: 3.3.3.1/...

lindaramdani · 01-18-2007

Sure thing!Didn't get every detail of the capture since I couldn't figure out a good way of copy/paste in Ethereal. Let me know if you miss something in particular.SERVER SETTINGSDHCP Server interface 3.3.3.3IP Pool starting address 1.1.1.100Size of ...

lindaramdani · 01-18-2007

Downgrading the router didn't help either!I also tried to shift the routers so Router1 became Router2, and Router2 got Router1's config. Far fetched, I know, but since it was an easy thing to do, I tried but the problem remains. So it's not the parti...

lindaramdani · 01-10-2007

There is no such command as 'sh ip socket' in the 871?Service dhcp is enabled in the router. I disabled it before to see if it made any difference, but it didn't so I enabled service dhcp again.(I'll see if I can find a bit older image to use in the ...

lindaramdani · 01-09-2007

Hi everybody!The router was shipped with 12.3(8)YI2, and since it didn't work I tried to upgrade to 12.4(6)T5 before I posted my problem here, but it made no difference. Today I followed your advice and installed yet a later version: 12.4(11)T, but t...

lindaramdani · 01-05-2007

Hi Rick!Thanks for taking your time trying to help me! Here follows the output you requested except output from debug dhcp which showed nothing at all. I also added the output of debug ip icmp to show that the router, as mentioned in my first post, i...

Member Since	‎11-08-2006 11:41 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	10

User Statistics

User Activity

DHCP relay problems

Re: DHCP relay problems

Re: DHCP relay problems

Re: DHCP relay problems

Re: DHCP relay problems

Re: DHCP relay problems