About sjouke

sjouke · 02-16-2005

Is there a way to upgrade ACS 2.4 to ACS 3.3 preserving the user and group databases ?Maybe I have to follow a path like 2.4 to 2.5 to 2.6 to 3.0 to 3.3, but I don't know.A hard upgrade from 2.4 to 3.3 doesn't give the wanted results. The installing...

sjouke · 11-14-2003

I'd like to know wether it's possible to have a vpn tunnel ending on a DMZ interface rather then the inside interface of a 3-way pix. All configuration examples I found route the traffic from the VPN client somewhere on the internet to the inside int...

sjouke · 02-24-2005

Thanks for the manual. I'll test this and if it succeeds I'll implement it in the live situation.

sjouke · 02-16-2005

No, you don't need route commands.You could try the commands :debug crypto isakmpdebug crypto ipsecWhen you start the tunnel with traffic from one of the Lan's there should be a lot of logging output from both pixes. In that output, if any, you can s...

sjouke · 02-16-2005

What you show us are private ip addresses. Does that mean you have routers in front of your pixes that use public ip addresses ? Or did you anonymize your config ?If 1, your routers should be correctly configured to let pass the ipsec/isakmp traffic...

sjouke · 08-20-2004

Hi,It's a combination. The pix finds all locations a pdm session could start from. The http x.x.x.x x.x.x.x command decides who can actually use pdm.The PDM location lines are for bookkeeping. Documentation : Cisco Pix Firewall Command Reference ver...

sjouke · 08-20-2004

Hi,I've seen this problem before. The device starts to boot and then hangs. My solution : take of the lid of the 506 and find the jumper. Remove it, place it back and boot your pix again. I should boot right now. Then start a Tac Case with Cisco to r...

Member Since	‎12-22-2002 11:50 PM
Date Last Visited	‎10-30-2017 03:47 AM
Posts	17

User Statistics

User Activity

Upgrading ACS 2.4 to ACS 3.3, what is the way ?

Is it possible to build a vpn tunnel to the DMZ interface on a pix 515 ?

Re: Upgrading ACS 2.4 to ACS 3.3, what is the way ?

Re: PIX-PIX VPN Trouble

Re: PIX-PIX VPN Trouble

Re: Auto Generation of PDM Location Statements

Re: deleting config file on pix506e