Finally I have something to contribute here! :-)
Microsemi's PD-9501GO-ET (datasheet and installation guide attached) is the improved version of the unit Cisco specifies on their datasheet (AIR-PWRINJ-60RGD1). Here are the part numbers for that i...
That solved the problem, thanks Javier! And as a bonus, now I can collect those stats using FTP in under 20 seconds, where before at the WLC CLI it would take at least 5 minutes over VPN.
For anyone else with the same problem, these are the commands...
Hi Javier,
I'm working on a stadium deployment in the US with 8540 WLCs and 3702p/2702 APs. WLCCA isn't giving me stats on all my APs. We've got 304 APs deployed, with 5GHz enabled on all 304 APs and 2.4GHz enabled on 178 APs, but WLCCA only sees 2...
Leo, this is the first time I've heard of a problem when issuing a reboot command from the AP. Now admittedly, I'm not normally in the habit of needing to reboot APs -- the only time they typically get rebooted is during code upgrades or power outag...
OK, whew! I've seen a 1-2% failure rate on upgrades going back 1-2 years now across multiple customers in different verticals, using either 8.0.x code or 8.2.x code. I'm in the habit of collecting good logs before each upgrade so I can track down t...