hi, there is a problem with the authentication of the Apple devices. try timmer with the increase of the EAP. (Thus, you give the client more time to respond.)here are my settings:::::(Cisco Controller) >show advanced eapEAP-Identity-Request Timeout ...
hi,you have multiple domains? The controller must always be cleared in the ROOT domain.The user for the SSH is "admin" and the root password you've set. miro.
Hi,you can on the create on WLC, a separate dummy L3 interface (192.168.250.0/24 and a VLAN thet is not on Your LAN "3333") and WLAN with the name "1"The DHCP is configured on 5508 with a lease of 240s. The SSID appears first in the selection. and t...
Hi,You should keep the WLAN ID over 16 in the third wireless all WLAN IDs to 16 are to be pushed into the default group, and so you have to define two new groups.in case you set the ID to the WLAN 17, you can configure a group "Other Wireless Netwo...
Hi,the correct "dBm" level You can see:connect to CLI(Cisco Controller) >show ap config 802.11b AP-Name##### in the 4 sections are the values ββand the adjustment ####### Tx Power Num Of Supported Power Levels ............. 7 Tx Powe...