Hi,I am trying to receive a multicast tv stream from outside our network through a Cisco ASA 8.0.4 firewall and into our internal Network. I have a router outside the firewall which is picking up the stream and if I plug into the switch that the rou...
Hi, I have attached a network diagram with a topology that is causing some problems. There is an AIX Server doing up/down monitoring of Windows Servers (top to bottom in the diagram). When sending 100 packets, we drop about 2 or 3. These are not al...
Hi, I am having a strange problem which I am sure is something simple but is driving me nuts. I am attaching a diagram to ease the description. Area 41 is a NSSA, all network devices in the diagram are in area 0. Core 3/4 are summarising the area ...
Hi All, I have inherited a network. One location has two routers, one is in OSPF Area 0 and the second is configured as a stub area. The second router has an external link to BGP also and is trying to redistribute ospf into BGP. This is not workin...
Hi, I have two sites with 3750G's running OSPF connecting to a metro cloud. There are a number of other 3750G's in the same cloud also however only two are having problems. The Input queue is currently showing 1024/75/218/0. The result is that OSP...
Hi Andrew, thanks a mill, can see now why it was choosing a particular path. The Metric for the summarized roue via edge 1 is one and the metric via edge 2 is one hundred! Really appreciate your assistance on this, will rate appropriately.CheersBri...
Yup, can see neighbor relationship with core 4. I am learning area 0 routes from core 4 also. It is just routes within area 41 that don't appear. Area 41 being a NSSA. Both Core 3 and Core 4 are injecting a default route into area 41 and both cor...
Ah Jasus you are not going to believe this. The access-list is specified but no route-map!!! Staring at a problem too long and miss the obvious! Thanks for your help Rick, wouldn't have figured it out otherwise!
