About bajancanuk

bajancanuk · 05-08-2006

Hello, i'm confused as to what type of NAT I should use for my PIX515E.Our network is at a colocation, and we deal with websites, and multimedia.So based on that, am I right, that I shouldn't be using PAT?I have assigned external IP's pointing to the...

bajancanuk · 05-08-2006

Hello, i'm confused as to what type of NAT I should use for my PIX515E.Our network is at a colocation, and we deal with websites, and multimedia.So based on that, am I right, that I shouldn't be using PAT?I have assigned external IP's pointing to the...

bajancanuk · 05-05-2006

Hello, I'm configuring a new PIX515E, and i'm a bit confused as to the proper fromat to use with regards to access-list/static command. I see 2 ways of doing things, and they both work... so if someone can explain which is the proper way, I'd appreci...

bajancanuk · 05-04-2006

I'm told by our ISP, that I have 5 subnets, and none of them are on vlans, and I have 2 uplinks configured as hsrp on the "outside" 2950, which then goes into a 515E Is this correct? or do I need to setup vlans?x.x.42.x/29 x.x.43.x/28 x.x.56.x/29x....

bajancanuk · 08-05-2005

Hello.We have a consultant, who's telling us, that we can't have internet access, while we connect to our cisco pix 501.Is this true?And, if its not true (which I believe), can someone point us to the info I need to verify this, and or the command li...

bajancanuk · 05-09-2006

I will! I'm starting to understand.What has me confused, I guess is the "wording".That, if I use 1 IP as my "outside" source, PIX will 'PAT' all internal to external with that 1 ip.I CAN'T do that (PAT), because I have multimedia apps on the server, ...

bajancanuk · 05-08-2006

ip address outside X.X.42.148 255.255.255.0ip address inside 192.168.0.1 255.255.255.0access-list ACL_OUT permit tcp any host X.X.42.44 eq www static (inside,outside) tcp X.X.X.44 www 192.168.0.10 www netmask 255.255.255.255 0 0access-group ACL_OUT i...

bajancanuk · 05-08-2006

I just found out from our ISP, that the HSRP is configured elsewhere, NOT on the 2950. So I do appreciate your confirming this!. Here I am, thinking I have to setup vlans, etc for the outside switch!Again, thanks!

bajancanuk · 05-08-2006

Ahhh, so, the HSRP is setup NOT on the 2950, but on the "next hop" switch they have setup. The 2950 only has 1 IP, which is the gateway to the internet for both the 2950 and my firewall...one last question: if I have several subnets, do I have to ent...

bajancanuk · 05-06-2006

thanks for the help. and yes you understood.I have a diagram of our topology from the ISP,and from what I can understand, is that the "config" of the HSRP "might" be done in the OUTSIDE 2950.So, the 515E's outside is connected to the OUTSIDE 2950.I s...

Member Since	‎08-05-2005 05:39 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	13

User Statistics

User Activity

what type of Nat setup?

what type of Nat setup?

prefered format for PIX515E

do I NEED to have vlans, if I have different IP subnets, and a hsrp?

Cisco pix 501: While connected, can we get internet?

Re: what type of Nat setup?

Re: what type of Nat setup?

Re: do I NEED to have vlans, if I have different IP subnets, and

Re: do I NEED to have vlans, if I have different IP subnets, and

Re: do I NEED to have vlans, if I have different IP subnets, and