About ssamaharn

ssamaharn · 03-02-2010

We have 2 core 6509 switches core1 and core2 that connected to each other over a port-channel1 made up of 6 ports (5/1-5/6). All Vlans are allowed on this etherchannel.We also have a HP Interconnect switch connected to core1 and core2 on port 8/1 cor...

ssamaharn · 03-03-2010

Should I do these command on my core1 and core2 ?core1spanning-tree vlan 1-111,999 root primarycore2spanning-tree vlan 1-111,999 root secondray

ssamaharn · 03-03-2010

Hi, JonIt's the same question. I was just reading about the BDPU guard on Cisco site yesterday about helping with spanning-tree.

ssamaharn · 03-03-2010

I've been reading about portfast BPDU guard. What would be the best practice for two 6509s to talk to each over an etherchannel?I have the show spanning-tree root, show spanning-tree summary and show config on one of the core 6509s.show spanning-tre...

ssamaharn · 03-02-2010

how long do we need for the downtime after we reconfigure the core switches?

ssamaharn · 03-02-2010

show spanning-tree vlan 1vlan0001 spanning tree enabled protocol ieee Root ID Priority 32768 Address 0002.a5d1.275b Cost 4 Port 897 (GigabitEthernet 8/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32769 (priority 32768 s...

Member Since	‎03-02-2010 11:55 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	8

User Statistics

User Activity

Spanning-tree question on a pair of 6509 and HP BL p-class GbE2 Interconnect Switch

Re: Spanning-tree question on a pair of 6509 and HP BL p-class G

Re: Spanning-tree question on a pair of 6509 and HP BL p-class G

Re: Spanning-tree question on a pair of 6509 and HP BL p-class G

Re: Spanning-tree question on a pair of 6509 and HP BL p-class G

Re: Spanning-tree question on a pair of 6509 and HP BL p-class G