About richard268

richard268 · 06-01-2004

My client is adding a new catalyst 2950T-48 port switch into his cluster management interface, but for some weird reason, C2950T-48 is not recognoized by the CMI and listed as an unknown device in the GUI. IOS version is flash:/c2950-i6q4l2-mz.121-19...

richard268 · 11-07-2003

Hi, guys,I got three 2950sx-24 switches gigastacked together(through WS-3500-xl module) and uplinked to a 6509 switch through a WS-G5484 fiber module. I configured the management interface in each of 2950 as following:int vlan1ip address 10.1.1.11 (1...

richard268 · 08-27-2003

Gentlemen:I am working on a Cisco wireless project. The 1200AP got its IP from a DHCP server. But when I displayed the network interface, I found it has one 100M ethernet card and 11M AP radio interface. I thought that 1200 AP has a built-in 802.11a ...

richard268 · 08-12-2003

Hi Guys,I was assigned a task to do a flat wireless installation in a few weeks. The products include 4 Aironet 1200 AP, 6.5dbi diversity patch antenna(s), Aironet wireless 54MBPS 802.11a int. antenna Cardbus PCMCIA, Cisco Sececure Access Control Ser...

richard268 · 04-04-2003

It confues me at the moment whether cisco 2950 switch or 3548xl is a layer 3 switch. (Do they have routing function?)I can put the following commands into 3548xl switch:int vlan 1ip address 10.1.1.1 255.255.255.0no shutint vlan 10ip address 10.2.1.1 ...

richard268 · 11-12-2003

Thanks for your answer.But I don't have any other vlans configured on the other switches.To be clear, all ports of three switches have been assigned to vlan 11. (Gigastack port belongs to vlan 11 as well, not working in trunk mode). Does that mean "i...

richard268 · 08-27-2003

searched through the Cisco Tech document and it looks like that I need to upgrade the 802.11a module in 1200 AP so that 54M 802.11a client can be associated. But my other questions remain if anybody can help me out. Thanks Richard

richard268 · 08-27-2003

I searched through the Cisco Tech document and it looks like that I need to upgrade the 802.11a module in 1200 AP so that 54M 802.11a client can be associated. But my other questions remain if anybody can help me out.ThanksRichard

richard268 · 08-13-2003

David,Thanks a lot for your help.Fist to clear your confusion:We are trying to use 1200AP for both 802.11a and 802.11b radio at the same time,and we already have one 1200AP with 802.11b clients, so we only order 802.11a client card and 4 additional 1...

richard268 · 04-04-2003

On second thought, I want to ask you another question:If the domain is a running on windows 2000 active directory structure, it seems that there is no need to set up a wins server, because according to microsoft, windows 2000 client will use dns serv...

Member Since	‎02-14-2003 09:04 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	21

User Statistics

User Activity

WS-C2950T-48-SI not recognized by Cluster management software

VLAN 1 interface is up, protocol is down on 2950 switch

AIR-CB20A card can't be associated with 1200AP

Any example about setting up wirless LAN network

Is cisco 2950 or 3548xl switch a layer 3 switch?

Re: VLAN 1 interface is up, protocol is down on 2950 switch

Re: AIR-CB20A card can't be associated with 1200AP

Re: AIR-CB20A card can't be associated with 1200AP

Re: Any example about setting up wirless LAN network

Re: VPN client 3.6.3 connection message and windows domain login