Using VG224 FXS port to integrate overhead paging. VG224 is registered with CallManager, but continous off-hook dial tone is presented on overhead speakers. Is this a config issue or is additional hardware required.
I ended up using the Valcom V-9970 for the overhead paging as in your suggestion, and a V-9924C for the night bell. Seems to work well and install was easy. The confusion was that Cisco PDIO told me that no other device was needed between the VG224 a...
Chris,I meant the IOS of the VG224, it was a new unit with a 12.4(2) image, so I upgraded to 12.4(11)T. we are using Call Manager 4.2(3). Where do you find the parameters to change the loop current as you suggested and the polarity reversal We are us...