softwareadmin
Level 1
Level 1
Member since ‎01-24-2006
‎08-18-2017

User Statistics

  • 12 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
5 Replies

User Activity

I'm running into an issue with a L2L VPN we have between one of our remote sites. At times one of the many networks there will stop passing traffic across the tunnel. Other networks at this location will continue to traverse the tunnel just fine when...
I'm currently running 6.3(5) on our PIX and am having some issues with a L2L VPN with a Juniper device. I've worked with both CTAC and JTAC to make sure the settings are correct on both ends. CTAC recommends that I upgrade the PIX to 7.2 and I was wo...
I have a L2L VPN between a PIX (6.3.5) and Juniper. On the PIX side I have 5 networks and on the Juniper side there are 6 networks. All is well most of the time, however, randomly a network will become unreachable. Other networks at this location ar...
I have a 6509 running native IOS 12.2 and for some reason the arp table is almost empty. I also have a couple of 7206 routers on the same network (connected to the 6509) that have a full arp table like I expect to see on my switch. This is the first ...
I'm just dipping my toes into PBR so bear with me here.Essentially, I am tying to route traffic from one remote office, through a data center (via a dedicated DS3 link)and out to the internet from there. I'm hopeful that the configs below will work a...
Community Statistics
Member Since ‎01-24-2006 10:52 AM
Date Last Visited ‎08-18-2017 03:54 AM
Posts 12