Some PC cannot work with the Virual Address of the Router (MSFC2) and must therefor take the standby or active address. Is there a solution or explanation for this Problem ?

I want to change the IP-Address shown in the RME for my MSFC2.How can I do this ?

I want to use the fwsm behind the MSFC2 in multi context mode.Can i define a unique IP-Adress for a shared outside Transfer vlan to the router on the fwsm, with a global command or something like this for all contexts ?Can someone send me an example ...

We have a new FWSM Module with Version 1.1(4).We want to upgrade this Version and have the Problem to get connection to the MSFC.The transfer-Vlan is configured and up on the Switch, the MSFC and declared as a firewall-vlan, with set vlan 700 firewal...

I wanted to use a VLAN with an IP-Adress at the MSFC2 as a transfer VLAN for the FWSM.The MSFC should route to the outside. The FWSM is in a Multi-Context, routing Mode and there should only be one Transfer-vlan.The Cat6500 has CatOs and the MSFC IOS...