About Rockford

Rockford · 11-21-2017

Hi All, I have a curious issue with a customer where I have been asked to come in to assess their wireless environment. There are a few immediate issues where they will not give me access to the WLC read only or PI but they have informed me that on...

Rockford · 09-30-2014

Hi Community folk,I need some advice on how to set up a dual (resilient) wireless bridge link.I have each pair of bridges configured trunking vlan 82 native and user vlan 570. Individually they are fine and I get management access on vlan...

Rockford · 08-20-2014

Trying to find out which one does what with regards to MSE and Prime, can the raw data be used from either or are their specific things that one does that the other doesn't?

Rockford · 10-14-2013

Hi Community folk,I have a project manager who has come to me after selling a 3600 + 802.11ac upgrade module to a customer to use as a wirelesss bridge, they have actually got it connected but only at 54M, I've done some digging into this and can't...

Rockford · 02-25-2011

Hi All,Can the LDAP be configured on the Digital Media Manager to point to at least two Domain controllers? Ive not configured DMM before and cannot prestage it so I need to be competent when I am on the customer site. Not the best situation to be i...

Rockford · 11-22-2017

Turning them all off though you're then not listening on 2.4 what about rogue APs! XD

Rockford · 06-13-2017

Thanks for the advice Patoberli, I'll get on the case.

Rockford · 06-13-2017

Opening the debate again as I see this is 11 months old but I can't see that it has been answered? I'm currently engaged with replacing 14 x 5508's with 5520's and was wondering if indeed the licenses are transferable from the 5508's? Thanks Rockfo...

Rockford · 10-15-2013

Hi Steve,Thanks for the prompt reply, this is the correct answer but I was aware of the WPA2/AES requirement to enable the higher rates that 802.11n supports. The question was really around whether the 3602 + 802.11ac module was capable of bridging a...

Rockford · 01-28-2011

This response must be out of date now due to 802.11n does anybody have any idea how many clients cisco recommends per access point now? All I can find is a pdf on collaborative high density testing with intel and they use 10 clints with an average th...

Member Since	‎11-07-2006 02:26 AM
Date Last Visited	‎08-09-2023 07:09 AM
Posts	26

User Statistics

User Activity

2.4GHz Radios

Wireless Bridge Resilient Trunk Link

Ekahau vs AirMagnet

Can you use a IOS 3600 wireless access point as a bridge

Show and Share DMM LDAP

Re: 2.4GHz Radios

Thanks for the advice

Opening the debate again as I

Re: Can you use a IOS 3600 wireless access point as a bridge

Re: How many wireless clients an access point can support.