About sureshsolomon

sureshsolomon · 12-23-2008

Hi Guys,I have an issue with a missing password on the "ws-svc-cmm-6e1 module"I have refered to this document http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_14107.html#wp133394I need some clarification here.1. What...

sureshsolomon · 12-29-2008

The {ISDN Switch Type - ETSIï¼ŽLine Coding - hdb3ï¼ŽFraming - crc-4 ) is an E1 configuration.Hi tcatlinins,You may have a card type command set to T1.Thats why you only see he B8zs which is a T1 config.You may need to set the card type commandcard t...

sureshsolomon · 12-25-2008

Hi Sally,I had a problem with this issue too. Let me give you what I understand on the VLAN.1. switchport access vlan 63 The end device connecting does not need to understand dot1q headers. So any device will work without issue.The packets with the v...

sureshsolomon · 12-23-2008

Thanks Giuseppe,I managed to rest the password, used a Cat 5 cable connected to a rj45 -DB9 connector to the second port ,the one at the back as you mentioned .I will try changing the OS to catos. Thanks again.Suresh

Member Since	‎12-23-2008 02:45 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	4

User Statistics

User Activity

ws-svc-cmm-6e1 questions.

Re: Configuring E1

Re: Voice VLAN concepts

Re: ws-svc-cmm-6e1 questions.