About Emmanuel_Roberts

Emmanuel_Roberts · 12-03-2014

Hi all,I have a very strange question and not sure if this is the right place but I'll try.I currently have 2 ASA 5520 in Active/Standby failover in routed mode and working perfectly. I recently acquired 2 ASA 5525-X which I would like to temporally ...

Emmanuel_Roberts · 02-10-2009

I have a network where I use two separate ISP connections on different locations within the same building. I would like to install an ASA 5520 to each connection as we don't have any firewall at the moment. Some of my traffic from one segment to the ...

Emmanuel_Roberts · 08-11-2018

Hi, can I ask if you can do this only for a VLAN and not on a specific interface?

Emmanuel_Roberts · 12-04-2014

Hi Marvin,So if I understand this correctly, there is no way for the second pair to detect that the first pair has failed over unless there is a hardware failure. Just to add here that the firewalls are not doing any load balancing so there is only o...

Emmanuel_Roberts · 02-10-2009

Thank you very much for this, will give it a go.Regards,

Emmanuel_Roberts · 02-10-2009

Not at the moment but I could connect them by fiber. What will be the best way of doing this? I am just worried of creating a loop.

Emmanuel_Roberts · 02-10-2009

I hope this helps.Regards,

Member Since	‎02-10-2009 04:52 AM
Date Last Visited	‎06-26-2020 12:54 PM
Posts	8

User Statistics

User Activity

ASA failover behind another ASA in failover

Connecting 2 ASA 5520 internally

VLAN mtu

Hi Marvin,So if I understand

Re: Connecting 2 ASA 5520 internally

Re: Connecting 2 ASA 5520 internally

Re: Connecting 2 ASA 5520 internally