hi,you can use an ip sla - track command targeting an ip that only can be reached from the carrier connection. Ip that ip sla fails you can create an alarm or switch to the other back-up connection. mustafa..
Hi.You can form a snmp RW variable and use it in generating configuration names. For axample "conf""$_info_snmp_value"".cfg" for config file.And for reload time you can use sysUpTime (1.3.6.1.2.1.1.3) in cisco oid. If the value of sysUpTime is reache...
Hi..You can use 2 scripts and 2 snmp RW variables (i.e. description of an unused interface).First script; to control snmp RW variables AND your events. According to your events you can set variables from 0 to 1. Second script; to reset variables from...
Hi..1. You can track an outside IP adress via static route and ip sla from first cisco device (LL) via ADSL line. 2. You can track the ADSL line status with "info type snmp oid 1.3.6.1.4.1... get-type.." command from the first LL device.According to ...
I recommend you to make a snmp WR variable (i.e. a description of an unused interface, 1 for normal situation 0 for faulty) and run the script every 15 or 20 seconds. According to the value of the variable AND ip sla status (1 for normal situation 0 ...