About cdayton

cdayton · 07-17-2008

FCIP 11 appears to be operational, but Device Manager is reporting "trunkNotFullActive" in the Failure Cause column. Has anyone experienced passed failures hanging around forever?Running on 3.2.(2c).

cdayton · 12-05-2006

NTP & CFS does not seem to be sync'ing time between 3 MDS9216i switches running 3.0(3). According to the documentation, all is setup properly, but all 3 switches have different time values.The prefered switch is pointing to a Time Server throught th...

cdayton · 06-15-2006

A gig1/1 interface on a 9216i is servicing 2 FCIP tunnels (port 3225 & 3737) from 2 other 9216i switches. The FCIP ISL connecting to port 3225 has IPSEC configured and is working (trunking). The FCIP ISL connecting to port 3737 was trunking prior to...

cdayton · 06-08-2006

The Fabric Manager documentation indicates that IPFC can be used for in-band Management of other switches.Is this true when the only ISL connections between the switches are FCIP tunnels?My experience is telling me the answer is no. VSAN 1 interface...

cdayton · 05-15-2006

The Cisco 9216i switch's mgmt interface is on a private LAN that does not have an SMTP server. Is it possible to route outbound email through a gigE interface which is also an FCIP ISL?Has anyone had success at implementing Call home without a SMTP ...

cdayton · 12-18-2006

Hi Stephen,I always trust the CLI and use the GUI as backup. We have FM running on a Windows 2003 server and are experiencing similar behavior.-Craig

cdayton · 12-18-2006

I'm not experiencing this bug on 3.0(3). The NTP server that was being references was a Windows 2003 server running the native time service.After talking with the Sys Admin, it was discovered that the time services only function as a client unless s...

cdayton · 12-18-2006

Sometimes the Cisco FM/DB services just need to be stopped and started to pick up the changes.If the CLI doesn't know about the Aliases, then I'd do the above.HTH, Craig

cdayton · 12-05-2006

Stephen,Would be useful to state a little more about your installed version and host. Anyway,if this is a windows install of FM try stopping and starting the associated Cisco services (server and database).HTH, Craig

cdayton · 06-25-2006

Its my understanding that one must use sub-interfaces on a shared GE interface for IPSEC to work correctly. A different crypto map will get assigned to each sub-interface. Also, ethernet trunking must be enabled too.This solution has not been attem...

Member Since	‎03-06-2006 12:53 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	16

User Statistics

User Activity

MDS 9216i - FCIP trunkNotFullyActive

NTP/CFS config on M9216i switches

IPSEC w/ 2 FCIP tunnels using a single gigE port

Fabric Manager InBand Mgmt/IPFC/FCIP?

Call Home w/o SMTP Server

Re: fabric manager does not appear to update.

Re: NTP/CFS config on M9216i switches

Re: Fabric Manager information wrong.

Re: fabric manager does not appear to update.

Re: IPSEC w/ 2 FCIP tunnels using a single gigE port