About PilbeamSupport

PilbeamSupport · 02-15-2012

Hi,We have a bit of a strange issue where we have some devices on the network which cannot be secured and we need to isolate from the rest of the subnet.Our switches are Cisco 2960.Is it possible to via an ACL local a specifric port down to only allo...

PilbeamSupport · 02-15-2012

Thanks, I'll just have to apply the ACL to the VLAN opposed to an interface.Sean

PilbeamSupport · 02-15-2012

Hi,It's running LanLite.TCP/IP is all we're worried about.Thanks,S

PilbeamSupport · 02-15-2012

Alain,I had tried this approach but get the following error when I try to apply the ACL to the interface: %ERROR: Port-based ACLs are not supported with this imageI have found that I can apply it to the VLAN however and this works. Does the 2960 sup...

PilbeamSupport · 02-15-2012

Alain,This is indeed what I've found, I'm happy to block it based on IP but my understanding was that IP based ACLs only worked on routed networks, i.e. you could set one for 10.1.0.0/24 denied to 10.2.0.0/24. but not 10.0.0.1 denied to 10.0.0.2.If i...

PilbeamSupport · 02-15-2012

Thanks for the response Alain, but I'm not sure how this would help, perhaps I should explain this better:Subnet 10.0.0.0/24Device needing protection: 10.0.0.1Devices which should be able to access it: 10.0.0.2-10 (various MAC addresses)Devices which...

Member Since	‎02-14-2012 11:59 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	6

User Statistics

User Activity

Local subnet MAC lockdown

Local subnet MAC lockdown

Local subnet MAC lockdown

Local subnet MAC lockdown

Local subnet MAC lockdown

Local subnet MAC lockdown