Hi,Is it possible to have redundancy for VTP server? Can we have a switch configured as VTP server with other switch in standby mode with same VTP configuration, like VTP domain name, password etc. If we can have this configuration how can we make ...
Hi,We are planning to implement VRRP in the Cisco router. After moving through the certain document about the VRRP I believe that there are certain difference between VRRP and HSRP.1. HSRP uses floating VIP however in case of VRRP the VIP will be p...
Hello,I have a small doubt that too about the basic of networking it?s not related to Cisco products directly. When so ever we try a PING from a Windows computer we get a TTL value. AFAIU TTL value is going to be decremented on ever layer three ho...
Hi, We are experiencing at least one unwanted fail over per day at the peak hours. Sys log showed the messages "master down timer expired" and some of the events related to HSRP. After analyzing the sys logs our vendor recommend to enter the comma...
Hello,We have an DHCP server in subnet of 10.10.156.0/24 which have a ranges configured for 10.0.0.0/8. One of the router (10.10.157.10/23) is configured as relay agent to convert DHCP discover broadcast to unicast. Clients can easily obtain the IP ...
Hi,DLCI is needed to be configured on the router for local identification or may be Global identification at Data Link layer. After entering the DLCI user "show frame-relay pvc" and check value should be shown at at least one under local - Active. ...
Hi,Just check out whether what is CRC and reilability shown on the interface once its up and running. if its less than 255 and there are CRC then we need to assume that it could be PPP link issue. Also just the vakues shown for DCD, DTS when link ...
Kevin,As far as I know with TTL Scoping concept; router will forward the multicast packet only on the those interfaces whose TTL value is less than or equal to the TTL value of the multicast packet. As we know default TTL of interfaces on Cisco rout...
