About michael murphy

michael murphy · 02-08-2023

Is it possible to use the Cisco 2700 ap logs to identify coverage gaps? We have a client warehouse that is experiencing disconnects and only with the honeywell ct40 vs the older symbol rf scanners which don't disconnect. Hiw could I filter the logs t...

michael murphy · 08-29-2021

I have a site that has good 5Ghtz (802.11a) coverage. heatmap so if we are upgrading our APs to 802.11ac , why would I need a specific 8021.ac survey? Does Airmagnet test other features of 802.11ac and possibly alter my current AP placement and conf...

michael murphy · 07-08-2016

Configuration :: Default EU Name SKU Manufacturer Mfr. Part # Qty Description Discount 1G8466 CISCO - HW UNIFIED COMM LIC-CUCM-11X-ENH-A 1 UC MANAGER 11.X ENHANCED SINGLE USER UNDER 1K Comment: You need to submit a DART request for the...

michael murphy · 08-09-2013

We have a 1600 AP and can regsiter phones fine over a 802.11g. But when using the 802.11a it never gets connected and the phones signal light is blinking with yellow flag off/on. Other laptops though connect to the AP on 802.11a. W...

michael murphy · 08-05-2013

what is the difference or purpose of the CME # LOAD command and the #create cnf-files? They both seem to create config files for the phone to download.

michael murphy · 02-08-2023

Does this CHD apply to a 2.4 wlan, as 5g is turned off? They claim their older RFscanners stay connected to same SAP telnet server without losing session. We need to prove using logs there are wifi gaps of when the ct40 sees disconnect we can find m...

michael murphy · 02-08-2023

Will this CHD alerts apply for 2.4g as 5g is turned off?

michael murphy · 08-06-2013

I've seen this diagram.Can I plug my AP directly into the ethernet port on the 2911? If not will any switch do?Also, there will be a VMXL server added later, where does this get connected physically?Let me know on this sample config what else I woul...

michael murphy · 07-31-2013

By looking at the CME config, what stmts woudl indicate if the config is for a SCCP or SIP 79xx phone? thanks

michael murphy · 07-29-2013

I believe both Carlo and George got me some good tips to use. Since I dont have a second IP phone woudl a call to my phone return a busy signal - would this prove some of the cme config? For the TFTP manual settings- I was hoping to use the cme rout...

Member Since	‎08-31-2005 04:15 PM
Date Last Visited	‎02-09-2023 11:38 AM
Posts	40

User Statistics

User Activity

2700 wireless coverage gap

802.11ac site survey needed if good signal at 802.11a?

Part order for CUCM- Are these SKUS/part# correct to order CUCM SW for 5 phones?

7926G works over 802.11g but not 802.11a

cme load phone firmware and configs

Re: 2700 wireless coverage gap

Re: 2700 wireless coverage gap

Lab setup- 2911/CME, aironet AP, and 7926

Re: Test verify cme config with 7960 phone

Re: Test verify cme config with 7960 phone