About TodirascuOvidiu

TodirascuOvidiu · 05-17-2009

Hi Guys,I have this problem.My setup is like this:router eigrp 5network 0.0.0.0 255.255.255.255no auto-sumWhen i do:ip route 10.5.1.0 255.255.255.0 null0this route gets redistributed int eigrpbut when i doip route 123.5.6.0 255.255.255.0 null0this is...

TodirascuOvidiu · 09-08-2010

The solution would be to use Zone Based Firewall this is the new ios firewall. The configuration is lenghty but if you have experience with PIX/ASAs you will find it easy to learn.http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186...

TodirascuOvidiu · 02-21-2010

lamav wrote:Interesting topic...Was just reading some QoS material...So, is SRR a queueing mechanism like WRR, WFQ, CQWFQ, etc?Yep Is it used in conjunction with others?Is it used with classicifaction and marking, as in an MQC architecture?It has it'...

TodirascuOvidiu · 02-18-2010

Hello,As per my understanding limiting on egress on a 3560 using "srr-queue bandwidth limit 30" drops the excess and does not delay it as you asked in the first post.Regarding the test results are you sure they are accurate ? Have you tried testing ...

TodirascuOvidiu · 02-17-2010

Hello,I belive this configuration is not correct. The formula used to assign a certain bandwidth to queues when shaping on egress on 3560 is portspeed x 1/weightSo in this config for example queue 1 would get 100Mbps x 1/10 = 10Mbps etcAlso a weight ...

Member Since	‎05-17-2009 06:13 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5
Total Helpful Votes Received	4

User Statistics

User Activity

eigrp redistribution problem

Re: how to configure dmz on 2821 with multiple public ip address

Re: 3750-SRR

Re: Howto configure output traffic shaping on Cat3560E switch?

Re: Howto configure output traffic shaping on Cat3560E switch?