About rrairineo1

rrairineo1 · 09-30-2016

can i configure a layer 2 switch with a layer 2 etherchannel and on the other side a layer 3 switch with a layer 3 etherchannel? can this work?

rrairineo1 · 03-23-2016

Hi all, I have this design plan for redundancy for our stack switch. i have simulated it and works perfectly fine (using STP). Somehow I notice i cannot simulate the router to switch connection. The routers will be connected to the two stack switches...

rrairineo1 · 03-19-2016

hi! i have 3 routers. currently r1>r2>r3 is the sequence using vrrp. r1 is the primary yet when r3 down our r1 services were affected. will "show log" command reflect vrrp changes? how will i know if the trouble or error is local in my network or my ...

rrairineo1 · 03-17-2016

Hi all, I have this setup (the first picture) and i want to introduce redundancy (I am a just starting to gain experience on networking) because whenever one of the stack switches fails, failure of some services are experienced. So in order for it n...

rrairineo1 · 03-17-2016

Hi. how can i introduce redundancy to avoid failover of services running in two different stack switches? Before, one of the stack switches failed and some of the services in our network were affected. how do i introduce redundancy to this current se...

rrairineo1 · 04-05-2016

thank you for your suggestion. thank you for sharing good pointers. i will be reading the references. until next time.

rrairineo1 · 04-04-2016

"In Cisco IOS Release 12.4(17.6), EtherChannel support is introduced for embedded Fast Ethernet and Gigabit Ethernet interfaces on Cisco 2811, Cisco 2821, Cisco 2851, Cisco 3825 and Cisco 3845. Additionally, the same feature is also supported on the ...

rrairineo1 · 04-04-2016

hi thank you. for the access level switch that is noted ill use port-channel to connect it to each member of vss switches. what would you recommend to use: 4500, 6500, or 6800? for the connection from router to vss switches i think ill follow this on...

rrairineo1 · 04-02-2016

hi. changed plans. i was advice that i can now use vss instead of the 3750 stack switches. (same scenario as the one i presented here). i would like to ask which is better to use 6500, 4500, or 6800? i am really new at this one. never used any of tho...

rrairineo1 · 03-29-2016

thank you very much for your help. i think my problem is solved. until next time. thanks for your expert advice.

Member Since	‎03-03-2016 06:10 PM
Date Last Visited	‎11-13-2018 04:06 PM
Posts	25
Total Helpful Votes Received	5

User Statistics

User Activity

How to make portchannel between layer 2 and layer 3 switch?

How to configure router to connect to two different stack switch belonging to the same broadcast domain?

help me troubleshoot this one.

how to create redundancy for stack switch?

how to create redundancy for existing stack switch?

thank you for your suggestion

"In Cisco IOS Release 12.4(17

hi thank you. for the access

hi. changed plans. i was

thank you very much for your