About huucuonghumg

huucuonghumg · 02-20-2017

Dear everyone!, My switch is 2960X cannot start after I config wrong and loop reboot everytime. I was download new IOS: c2960x-universalk9-mz.152-2.E6.bin but nothing change. Everyone help me pls! Connecting to COM6...Connected. Err: Interrupt: Mach...

huucuonghumg · 04-27-2016

Dear everyone, I have problem witch install firewall asa 5525X, version IOS sfr 5.3.1, version firesight management 5.4.0. I was add firepower sfr to firesight management done, but cannot show any data or traffic from firesight, critical: Critical ...

huucuonghumg · 02-21-2017

thanks Leo Laohoo and Satwant Singh i will try contact with TAC

huucuonghumg · 02-20-2017

Hi johnlloyd_13 switch: flash_initInitializing Flash......The flash is already initialized. i was boot to c2960x-universalk9-mz.150-2.EX5 or c2960x-universalk9-mz.152-2.E6.bin but switch still reboot loop: entry point: Err: Interrupt: Machine check ...

huucuonghumg · 02-20-2017

Dear Satwant Singh, I cannot enter to rommon mode.

huucuonghumg · 08-13-2016

Hi jwornstaff You must sure traffic throught from inside to outside (nat, access list permit from inside to outside). After put a laptop test ping or access internet from inside. traffic will show in dashboards. :) thanks

huucuonghumg · 05-20-2016

Hi Aastha Bhardwaj I was config the config: ciscoasa(config)# access-list sfr_redirect extended permit ip any any ciscoasa(config)# class-map sfrciscoasa(config-cmap)# match access-list sfr_redirectciscoasa(config)# policy-map global_policyciscoasa(...

Member Since	‎03-10-2016 02:19 AM
Date Last Visited	‎04-03-2018 09:56 PM
Posts	22

User Statistics

User Activity

cannot boot switch cisco 2960X, reboot loop

Interface 'DataPlaneInterface0' is not receiving any packets

thanks Leo Laohoo and Satwant

Hi johnlloyd_13

Dear Satwant Singh,

Hi jwornstaff

Hi Aastha Bhardwaj