About mlwartman

mlwartman · 04-16-2021

I am using aironet 1140's in autonomous configuration to create a wireless bridge for vlan's 1, 5, 10, 15. The problem i am having is the client access point is failing to pass anything but vlan1 through to the client side network. from the client si...

mlwartman · 09-05-2010

ok. we have a UC500 at work on a dynamic ip that never changes. i am attempting to setup an ezvpn connection with an ASA, mainly for use with VOIP. the asa will connect, grab a vpn IP, and seem like it's connected. however, i cannot access resources ...

mlwartman · 01-27-2010

as the subject states, i'm trying to build a persistant VPN tunnel for data and voice. the office is static, but the satallite is my home with a PPPoE DSL broadband connection. I found a walkthrough on building a persistant VoIP VPN tunnel between 2 ...

mlwartman · 04-16-2021

Thank you very much. That's what i was doing wrong. I was only adding the radio sub interfaces that i thought that particular radio would be accepting clients on as well as the infrastructure ssid. I need a sub interface on every physical interface, ...

mlwartman · 04-16-2021

below are the interfaces configured on the 5ghz radio. if i am correct i should only need vlan1 configured since everything else is tagged. am i incorrect in my thinking? interface Dot11Radio1no ip address!encryption vlan 1 mode ciphers aes-ccm!ssid ...

mlwartman · 08-28-2017

i ran into this error as well. the CNA appears to be pulling a community list from the online profile somewhere as opposed to reading local config files. I am still chasing down how to prevent CNA from reloading previously deleted communities, but in...

mlwartman · 01-27-2010

being that i have no clue what option 150 is, probably not.a little background, i'm a linux admin/hardware tech who moved into the more mainstream of microsoft networking. i have very little actual cisco experience and this entire project to get the ...

mlwartman · 01-27-2010

i am using a cisco 7920 ip phone. with the tunnel connected, the phone gets a local ip (196.168.1.0) not a voice network address (10.1.1.0). even when i assign it an address on the voice network, it can't connect to the call manager.

Member Since	‎12-05-2009 07:19 PM
Date Last Visited	‎04-23-2021 07:11 AM
Posts	18

User Statistics

User Activity

VLAN issues over wireless bridge

help. ezvpn issues.

uc520 and ASA - building a vpn tunnel with a PPPoE Client.

Re: VLAN issues over wireless bridge

Re: VLAN issues over wireless bridge

Re: Cisco Network Assistant: error deleting community

Re: uc520 and ASA - building a vpn tunnel with a PPPoE Client.

Re: uc520 and ASA - building a vpn tunnel with a PPPoE Client.