Hi,We have a recent new build if DNAC 2.2.3.5 and I am currently looking at IOS upgrades on cisco 2960XR switches.I have built a stack of 4 2960XR 24_PS to upgrade the IOS and test how well DNAC performs.Unfortunately, DNAC fails reporting the follow...
Hi,We have a new installation of DNAC - Version 2.2.3.5The issue I have is with some, not all IOS updates to 2960X/XRs which fail the pre-check with the following messages:Unable to download file using HTTPs and SCP.The certificates are installed and...
Hi, Just about to install Cisco DNA centre and I have a question about ip addressing. Does the cluster link need to be in its own vlan/subnet or can it go in a shared vlan/subnet with other server hosts ? I have seen an example where the cluster has ...
Hi, I've just installed Prime Infrastructure 3.9 on our secondary appliance. The appliance has been setup as secondary and is currently stand alone and not in a pair. I have tried to login for the first time with the HA key so that I can install the ...
HiWe have 2 x Cisco prime appliances that I need to upgrade from 3.4 to 3.9.I have already upgraded our primary appliance from 3.4 to 3.7. The next step is to install 3.9 on our secondary appliance and then restore a backup from 3.7 build to 3.9 as r...
Thanks Steve, I was going to try that next.Presumably, I just delete the device, without device cleanup ticked. No config changes/deletes will be made on the switch ?
Thanks Balaji, I have already upgraded our primary server to ver 3.7. My plan was to do a fresh install of 3.9 on our secondary server and restore from a backup from 3.7. Would this be the correct way to go ? Also, the ISO image for the fresh install...
Thanks Balaji, The servers are currently not in a HA pair, I already broke them to upgrade the primary to 3.7 in line upgrade.This server is now our production server and is standalone. My goal is to upgrade to 3.9. Upgrade the secondary box to 3.9, ...
Thanks Balaji, Those are the steps I'm following. Currently, our secondary is still configured as that. Does this need to be failed over to primary (3.4) first before I upgrade to 3.9 ?What are the steps for upgrading from ISO from 3.9.
