I'm getting this error "not all privileges assigned" everytime i change the LMS AAA mode setup to ACS. I already made the system account as super admin. Any suggestions?TIA
our network went down, upon checking got this error message from the switch:%SW_MATM-4-MACFLAP_NOTIF: Host 0024.0000.0000 in vlan xx is flapping between port Po1 and port Gi0/1found a recommendation from cisco saying "check configuration of data forw...
guys, we're planning to implement voip in our organization. just wanna ask, what is the best practice when it comes to assigning vlans for ip phones? does it need separate vlan (vlan 10 for computers, vlan 20 for ip phones) or same vlan?
Hi everyone, need ur help!!! I have 500 plus windows xp nodes that will connect using ipsec - tunnel mode ( site-to-site VPN implem) to head end cisco vpn appliance. What is the configuration set-up in the central cisco vpn device? thanks
here is what my network looks likecore switch | | |distribution switch (3560E) | | |-- access switch1 |-- access switch2 |-- access switch33560e is connected to the core via etherchannel
no, the client PCs are of different vlans with respect to their respective outside interfaces.i dont have working config yet for this setup but here is my current config:nameif vlan325 internet security0nameif vlan555 fwtest security0nameif vlan327 i...
hi jon,yes the fwsm is running multiple contexts. in one of the contexts, i created multiple outside interfaces (e.g. vlan 500 and vlan 555). i also attached a diagram to have a clearer viewthanks
Hi,one dhcp server is enough to cater different vlans in your network. you just have to create scopes/superscopes. scopes represents the each vlan. then define the ip address of the dhcp server in the dhcp relay agent (which is your workstation's ...
