About networksound

networksound · 12-02-2009

Our SRW224G4 detailsHW ver: 00.03.00Boot ver: 1.0.2FW ver: 1.2.2bHere is a picture of our back 2 back setup. We are trying to send a time sensitive audio traffic and IP traffic over a GbE link,We assigned audio traffic (port e1) to VLAN 2 and all oth...

networksound · 12-07-2009

Thanks for your pointers. Not sure if this is do with bandwidth issue. Since, when we send unicast IP traffic between 2 devices between switches, no problem at all. Audio traffic is affected only when I connect a drop from local router.As for as fail...

networksound · 12-04-2009

Thanks for all the reply.We did some more testing...1. when we send IP traffic between 2 devices (that can send and receive IP pkts on its own) connected on each end of the SRW, our audio traffic is not affected. So, we assume it is not Qos or queue ...

networksound · 12-03-2009

Thanks for your reply.We have tried Advanced mode on QoS and assigned Queue 4 to CoS priority 7 and assigned port e1 to Queue 4.All other ports are on Q1 and CoS prioirty 0.What about G1? Is there any setting for this?We enabled advanced QoS but have...

Member Since	‎12-02-2009 03:45 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	4

User Statistics

User Activity

SRW224G4 VLAN and G1/G2 failover issues

Re: SRW224G4 VLAN and G1/G2 failover issues

Re: SRW224G4 VLAN and G1/G2 failover issues

Re: SRW224G4 VLAN and G1/G2 failover issues