About brucemanore

brucemanore · 12-08-2009

HI,I used SDM 2.5 to configure a site to site VPN from my 2811 to a branch office rv802. It almost works!2811 network is 192.168.10.0/24; rv082 network is 192.168.1.0/24From the rv082 LAN, I can access anything behind the 2811, but traffic originatin...

brucemanore · 12-14-2009

OK, I ripped out anything to do with my static NAT rule to 192.168.10.102 ( I think!). and cleaned out all the stale rules,access lists, etc. I could find; deleted and reconfigured site to site VPN.This time the VPN came up immediately whereas there ...

brucemanore · 12-08-2009

JonI've been having some trouble with the site today too!I don't think I did a very good job sanitizing my config;apologies from a Newbie...I'm seeing a lot of references to "route-map nonat" on the Net which I don't have in my config. Should I?This ...

brucemanore · 12-08-2009

You might be on the something...The only machines I have access to at the 2811 site right now are the router (x.x.x.98 on the outside,192.168.10.1 on the inside) and 192.168.10.102 which does have One to One NAT rules translating host 101 on the outs...

brucemanore · 12-08-2009

Thanks Jon, Here it is:!This is the running config of the router: xx.xx.xx.xx!----------------------------------------------------------------------------!version 12.4service timestamps debug datetime msecservice timestamps log datetime msecno servic...

Member Since	‎12-08-2009 09:05 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

Routing problem:site to site VPN 2811 to RV082

Re: Routing problem:site to site VPN 2811 to RV082

Re: Routing problem:site to site VPN 2811 to RV082

Re: Routing problem:site to site VPN 2811 to RV082

Re: Routing problem:site to site VPN 2811 to RV082