Hi All,I am trying to understand AAA concept and its use along with CSACS using TACACS+ protocol.As far as I understand, by default there are 3 different privilege levels available (Ref: http://www.cisco.com/en/US/tech/tk59/technologies_tech_note0918...

Hi All,I have 2 Cisco 2811 routers which are connected back to back through 2 modems. In order to understand the time taken for the interface to come up, cable connected to Serial interface has been removed and plugged in again.I have kept continuous...

Hi All, I have two 2801 routers populated with VWIC-2MFT-T1/E1 card in each. I have configured routers using commands as below. controller e1 0/2/0framing no-CRC4clock source internalchannel-group 0 timeslots 1-31 These commands brought a serial inte...

Hi All,I have 2 Cisco 2801 routers each populated with 1 HWIC-2SHDSL card in it. I would like communication to happen between 2 routers using the DSL line (RJ-11 cable).Unfortunately 2 Routers are not able to communicate over the DSL line as of now. ...