I have a 6500 switch configured with a single primary vlan and multiple secondary vlans mapped to it (see below). First, Everything works fine. However, when I try to associate another secondary vlan (i.e. vlan 501) on gi7/1 interface all traff...
I manage an ASA 5520 with an ASA-SSM module at our university. The ASA-SSM-10 works well in detecting P2P traffic. When P2P is detected, the firewall is configured to deny the attacker Internet access for 1 hour. The "attacker" in our case would ...
I'm using a 2821 router to NAT an internal server to and from the outside world. The server is running Infotreive's Ariel software on ports 419 and 422. The internal server's ip address is 10.5.0.52. It's external address is 24.x.x.11. So, when t...
I got some clarification on the problem. It looks like students are able to connect to Halo 3 servers on the Internet. However, They cannot connect to servers on the local network. I'm using a Clean Access in-band appliance as the default router. ...
Our University campus is having the same issue with Halo 3. Many students are getting "moderate network" error messages and can't connect to any Halo 3 servers. Our NAT device is an ASA 5500 series appliance. Any feedback would be appreciated.
Again, thanks for the help. I configured NAT on a stick as the document suggested. It worked in that the internal connection's next-hop was altered to be the "nat outside" loopback address. Previously a working NAT translation from an external IP ...
I have an internal DNS that does just that. The problem is this Ariel program HAS to use the ip address, and it HAS to be the public 24.x.x.11 ip. Name resolution does not even take place.
