A) You can configure data Vlan for Desktops cause i can only see the voice vlan.B) You default gateway of your Hosts, shoud be your Vlan IP address, which for vlan1 is 192.168.3.253.sure
Hi there,Just verify that the command "voice rtp send-recv" is configured on your voice gateway routers. You can also verify that you are using the correct codecs in your regions, the correct bandwith in your locations and that your IP phones are in ...
Hi,I experienced a similar problem some years ago when implementing VoIP in our company. I am not sure if it is applicable to you but you have to find out from your PSTN company. In my case our PSTN supplied us with six PRI's with number ranges from ...
1. Do i have to configure all phones manually? or What?Yes, It is a clean installation. You have to configure CUCM Server with the basics of what you need to test, i.e Device pool, Partitions,CSS,Route patterns/list/group etc.2. How can i test the ph...
Hi There,If you only want to test the CUCM 7 functionality, without obtaining the licenses, you will have to install CUCM as a clean(new) installation.Do not choose the upgrade from windows option. Then all your services (including Callmanager) will ...