matt.siegel.cisco
Level 1
Level 1
Member since ‎07-24-2012
‎08-18-2017

User Statistics

  • 13 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
5 Replies

User Activity

I read a rumor that the RV016 does not support split VPN tunnels. See here:http://www.smallnetbuilder.com/lanwan/lanwan-reviews/31525-cisco-rv082-and-rv016-v3-vpn-routers-reviewedMy  understanding is that VPN tunnels on my RV042 routers will send  in...
I have an RV042 connected to another RV042 via site-to-site VPN.  The tunnel has been solid for months, but when I did an actual read/write test between PCs at either endpoint, the speeds were quite slow.Endpoint A has a line speed of 25/5.Endpoint B...
I have two routers, A and B, which have a VPN between them (across the internet).  If my understanding of VPNs is correct, then traffic should only be routed acorss the VPN tunnel when a client on the Router A LAN is trying to reach a client or resou...
This is my setup:  I have Router 1 in gateway mode, with R2 and R3 behind it, each handling one subnet. Router 1     WAN = 10.1.1.1        LAN = 192.168.1.1 /24Router 2     WAN = 192.168.1.2           LAN = 192.168.2.1 /24Router 3    WAN = 192.168.1....
I have an RV042 running the most recent firmware, and I'd like to know if the following is possible:I'd like to have two subnets, 192.168.1.0/24 and 192.168.2.0/24I'd like to have DHCP available on both, with some static DHCP assignments on both.I'd ...
Community Statistics
Member Since ‎07-24-2012 10:07 AM
Date Last Visited ‎08-18-2017 03:55 AM
Posts 13