About Michael Richter

Michael Richter · 01-31-2014

Hi thereI've just bought a RV180 router.The firmware is new: Release 1.0.3.10If I use the device in Gateway Mode I got speeds in test and downloads about 500Mbit/s, that would be good (tested directly at a 1Gig Backbone).But I wanna use the device in...

Michael Richter · 02-14-2014

Hmm sorry that's not workingThe real example is:WAN IP: 86.245.121.126/29LAN IP of Router: 86.245.121.249/29Client in the Network behind has LAN IP 86.245.121.250If I now configure NAT I got these errors:Public IP should not be equal to WAN IPorPubli...

Michael Richter · 02-13-2014

I have one public IP on the WAN Interface and I will use a PUBLIC /29 on the LAN side:in example:3.4.5.6/30 on WAN side3.4.6.0/29 on LAN sideand the client on LAN side should be visible with the LAN IP's:3.4.6.1 and 3.4.6.2.

Michael Richter · 02-12-2014

1:1 NAT doesn't work for me because I use a /29 IP block on the LAN side.It's strange when I activate the router mode and reboot the router, the configuration is still in router mode but My client shows up with the IP Adress from the WAN interface an...

Michael Richter · 10-17-2011

Yeah i solved it.The only problem was the wrong parameters for my usernames.i have had to use nt-encryptet at the end:username righter password xyyz nt-encrypted.after that it works.

Member Since	‎10-17-2011 09:41 PM
Date Last Visited	‎04-16-2018 02:52 AM
Posts	5

User Statistics

User Activity

RV180 slow in router mode

Re: RV180 slow in router mode

RV180 slow in router mode

RV180 slow in router mode

Re: L2TP IPsec doesn,t work on ASA 5510