About Jmorgan1413_2

Jmorgan1413_2 · 10-20-2011

Hi all,Let me preface this by saying that I'm pretty sure this is something that wouldn't stump most people here but, while I am fairly handy with switches, I am by no means an expert.I have 2 switches that I am connectiong together.One is an older W...

Jmorgan1413_2 · 02-19-2010

Hello,I have an ESM module (NME-X-23ES-1G) installed in a 2821 Router.I seem to have it configured correctly, but I am having an interesting problem.When I use the Web Based Device manager and click on "Port Settings" the ESM crashes. And Burns. It...

Jmorgan1413_2 · 02-18-2010

Hello All,I hope you can help me out a little bit here (and I hope I can make myself clear).I have a 2821 Router, with a NME-X-23ES-1G card. I also have a 2960 24 port switch.My network is 189.238.114.0 with a subnet mask of .192.I have configured t...

Jmorgan1413_2 · 04-19-2007

Hi,I am trying to configure DHCP on the E0/1 interface of my router. Is there any way to do this and limit it to only the network connected to that interface? We have set up our router so that e0/1 connects to a test network, seperate from our main...

Jmorgan1413_2 · 04-16-2007

Hi,I am trying to access a Citrix Web Interface server connected to the DMZ interface on my ASA 5510.The only way I can get it to work is by setting up a static NAT for the Web Server. I don't want to have to do this. I want to be able to access it...

Jmorgan1413_2 · 10-21-2011

Oh Boy,Well now the Cisco Network Assistant tool is showing a duplex mismatch. I have gone on to both switches and run a "sh int status" command and the connected ports on both switches both show "trunk a-full a-100". I have looked at the configs o...

Jmorgan1413_2 · 10-21-2011

Thank you Peter, Excellent answer.I just decided to go with it and set the link to autonegotiate. At least now the link is working and I don't have to look at the yellow exclamation marks in the Network Assistant software any more.Really great info ...

Jmorgan1413_2 · 10-20-2011

I actually think it may be more of a "because it's there" type thing. I can get stubborn about certain things - especially when they don't make sense.I'm not sure why since it autonegotiates at 100/full, I can't just set it that way. I typically t...

Jmorgan1413_2 · 02-22-2010

Hi Reza,I have not forgotten the deal. I had quite an adventure applying the update to ver 53. First of all I got the file and it turned out to be corrupt. I got mesages that the magic number was wrong and that it was too large for memory. I pers...

Jmorgan1413_2 · 02-19-2010

Thanks a bunch.I do NOT have a CCO account (but, hey I'm flattered that after my obvious clulessness you entertain the possiblity that I might - LOL) but I do have a guy who does and is sending me a link to the file (any time now).I'll let you know.J...

Member Since	‎02-08-2007 11:41 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	36

User Statistics

User Activity

Question about auto-negotiation

I can crash my ESM on demand

Connecting a 2821 Router and a 2960 switch

2621 XM DHCP on one interface only?

I seem to be forced to use NAT

Re: Question about auto-negotiation

Re: Question about auto-negotiation

Question about auto-negotiation

Re: I can crash my ESM on demand

Re: I can crash my ESM on demand