Hi,Any expert had detailed info about N7K-M108X2-12L (M1) vs N7K-F248XP-25 (F2)?Only some info from release notehttp://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/release/notes/60_nx-os_release_note.htmlIntegrating F2-Series Modules Int...
Refer tohttp://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps9911/product_bulletin_c25-616320.htmlThe optional Large Deployment add-on license allows a deployment to support more than 500 network devices. Only one Large Deployment lice...
For ASR1000 to support 4M routes, RP2 must be used. Does anyone know1) RP2 need to have 16GB memory in order to support 4M routes?2) Need to use ESP20/40 together with RP2?3) If RP2 + ESP10, supporting route table size down to 1M?4) 4M routes is sha...
Hi all,Sup7-E need license key to turn on IP services feature. For a Cat450x-R system with one Sup7-E with IP services license, later on redundant Sup7-E will be added to existing system. Based on 1 feature license per box, 1) Will the license ...
WiSM2 + VSS config guide fyi.http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note09186a0080b7c904.shtmlCat6500 12.2 SX VSS config still show no support yet.
In F2 datasheet,IPv4 entries• 32,768IPv6 entries• 16,384Does it mean "entries" = "routes"???But in M1 datasheet, it used "roiutes".ItemNon-XL ModeXL ModeIPv4 routes128KUp to 1M*IPv6 routes64KUp to 350K*
If so, any figure for routing table size (and others) for RSP with 4GB and 8GB memory?If ASR9K is based on N7K technology, N7K only have max 1M routing table size with XL license.Sergey Vasilenko wrote:Hello,Just the memory size diff for a higher con...
leolaohoo wrote:It should. You'll need SXJ as a minimum IOS for the Sup720 to recognize the WiSM2 blade.May be I asked in this wayCan two Catalyst 6500/Sup720-10GE in VSS mode support WiSM2?Current VSS config guide shown no WiSM2 support yet.