Hi,My problem is the next:I wanted to change our DHCP relay device (Linksys WRT54GL with OpenWRT) to Cisco 1751 router. There are in the same LAN.Far from that LAN there is a remote LAN where the DHCP+TFTP sever resides.DHCP relay worked with Linksys...

Hi,I want to setup a transparent bridge between c805 (IOS 12.3) and c2503 (IOS 11.1).The members of bridge would be: eth0 and serial0 interfaces.I want to bridge IP protocol.Is that possible?I tried to config it without cuccess.TIA,

Hi,I would like to know whether IOS supports NM-16ESW module and 802.1x protocol?I tried to setup a virtualized c2621 router with IOS IPBASE 12.3-6b and dot1x commands are missing.I tried out this description:http://www.cisco.com/en/US/docs/ios/12_2/...

Hi,I'd like to upgrade the IOS:Mr_Bb#sh flash:Directory of flash:/ 0 ---- 49096 Nov 8 2000 04:37:53 +01:00 TinyROM-1.4(1) 66 -r-x 6229492 Mar 18 2008 04:29:07 +01:00 [c805-osy6-mw.123-26.bin]8388608 bytes total (2031616 bytes fr...

Hi,System image file is "flash:c805-y6-mw_120-4_XM"Cisco C805 (MPC860) processor (revision 0) with 46944K bytes of virtual memory.Processor board ID JAD051808LACPU part number 33Bridging software.1 Ethernet/IEEE 802.3 interface(s)1 Serial(sync/async)...