Hi, In order to recover signal from the line, receiver must have some reference signal (just to correctly detect 0s & 1s send by far-end). I can imagine that if I set clocking to 'line' on the controller, then it tries to build this reference signal ...

Hello,I want to create a remote access to my router in such way that one user always get the same IP address while other users will have IP from the pool. Currently my configuration is following (all users get IP from MyPool):vpdn enable!vpdn-group P...

Hello,I have the following situation. In ACS I have local account (XYZ) and account connected with Windows domain (XYZ.domain). I have Cisco C3750-IPBase-M (ver 12.2(35)) and following situation: when I connect through vty line (telnet/ssh) my AAA mo...

Hello,I want to build a DMVPN with the possibility of creating dynamic tunnels between spokes. Configuration of the spoke:interface Tunnel0 description *** MULTIPOINT GRE *** ip address 10.0.0.40 255.255.255.0 no ip redirects ip mtu 1400 ip nhrp auth...

Hello,I wanted to download configs through SNMP so I followed http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml#appbut when executing last command: snmpset -v 1 -c private x.x.x.x .1.3.6.1.4.1.9.9.96...