About rmueller@willkie.com

rmueller@willkie.com · 08-11-2012

Hi,we use B200 M2 blades with M81KR on 2.02r, running Exchange 2010 on ESXi 5.0 with PowerPath /VE 5.7, the UCS is attached via MDS to a VMAX. EMC Best Practise for EX2k10 is to use PowePath and set the HBA queue depth to 128. How?I picked the "FC Ad...

rmueller@willkie.com · 08-24-2015

Hi,how can I force internal APs to use the internal management IP of the 5508 WLC (7.6.130.0)?All works fine, internal and external OE600 APs can successfully join. But internal APs seem to prefer the NAT IP of the WLC which means they create their o...

rmueller@willkie.com · 08-08-2012

We have the same issue. Cisco support found out that it is an "i2c bus issue" between IOMs, PSUs and fans. The fix is to reseat all PSUs (keep them out for a minute, one after each other with enough time to come up again) and also to reseat the IOMs....

Member Since	‎07-13-2012 03:23 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	4

User Statistics

User Activity

HBA Queue Depth

Hi,how can I force internal

Chassis power error and time