Hi,We recently experiencing DNS issues when we try to upgrade our domain controllers.What we do is to depromo the old DC and then promo the new dc with the same IP but different/updated sever names.Last week, when we do this on the first server, we ...
Hi,
I am using Nagios to monitor our windows server using WMI. So I configure the DECRPC on our ASA 5520 firewall but i still see the deny on port > 1024.
Below is the configuration:
class-map MSRPC match port tcp eq 135!policy-map type inspect...
Hi,
We are implementing new Nagios to monitor our windows devices via WMI. Nagios and our windows servers are behind the ASA firewalls.
As WMI is using random ports between 1024-65535 which is a huge range to open on a ASA 5520.Can we use ASA ins...
Hi,
We have an uplink port went down and up itself this morning. The switch is WS-C3560-48PS-S and ios is 12.2(55)SE10. The port went down and then up is one port of the port channel. when I check the logs, i got the following:
097615: Feb 8 201...
Hi all,
We have some new Cisco phones to deploy but the CDP/LLDP is disabled in our organization. We are trying to use Microsoft DHCP scope option 132 to send the voice vlan information to the cisco phone but it seems not working.
Is there anyone...
Hi,
I have the same issue as well.
In this case, can we use the inspect engine on firewall to resolve this issue instead of limit the ports on the windows server?
Thank you
Hi
The following are the sho run failover and show failover results, why need to disable the http replication?
sh run failoverfailoverfailover lan unit primaryfailover lan interface fo-link GigabitEthernet0/3failover replication httpfailover link...
