Hello Team, I've got few questions regarding the BGP 'Routing Information Sources' section under the bgp portion of 'show ip protocols'. 1) Why not all the bgp neighbors listed under 'Routing Information Sources'? 2) Are we supposed to see only conf...
Hello team,Can you please help me to provide the minimum required DRAM& Flash for the IOS images listed below? I've checked on this using Cisco feature Navigator& google, but no luck.c2900-universalk9-mz.SPA.151-4.M6.6.binc2800nm-advipservicesk9-mz.1...
Hello Jose,Makes sense. I've verified all the received routes from those 4 neighbors and looks like all neighbors receiving same routes and 192.168.1.3 is the preferred path for all those routes as it has heigher weight:) I upgraded the device few da...
Hey c-Davis,Just saw this post- I follow the below method to upgrade 4500 with dual sups-copy the image to bootflash& slavebootflash!update the boot statementconf tboot system flash bootflash:(needs to set the conf reg to 0x2102 if its set to other v...
I should 1st apoligize to Jawad Mukhtar - coz i've removed my initial reply to your post since my post had a typo which also removed his correct answer as he replied to my comments (i didn't notice that)PS: Port-channel configuration is normally used...
