About ansarivahid

ansarivahid · 08-15-2010

I have a problem in a FXO to FXO connections.I am using Cisco routers with VIC-4FXO and CUCM 6 with MGCP protocol.This is a schematic view of my scenario:[telephone A]________[PBX A]________[router A]________[router B]________[PBX B]________[telephon...

ansarivahid · 01-04-2010

Hello,i am trying to run CUCM 6.1 and 3845 router with VIC-4FXO as my voice hardware. i can dial out from ip phones to pstn, but i have a problem with inbound calls.In gateway port detail configuration there is a field named "attendant DN". when i e...

ansarivahid · 08-06-2011

I have exactly the same problem, It seems there is some serious issue between Android and Cisco,The only thing I've found is this:https://supportforums.cisco.com/message/3340443#3340443

ansarivahid · 01-05-2010

yes. before i move to CUCM, the solution was working fine based on route pattern configuration on router just like what you wrote above.and also the translation pattern is 8.22XXXX, where 8 (PreDot) will be discarded.then it matchs in route pattern 2...

ansarivahid · 01-05-2010

okayconsider a call from person1 in site1 to person2 in site2.the call initiated from pstn/pbx connected to the FXO ports of site1 gateway.then the translation pattern provide the dial tone. then person1 dial 22.XXXX, which is routed by a route patte...

ansarivahid · 01-05-2010

thank you for your help.actually i am using mgcp and i need to handle the problem in CUCM, so i can't use TCL script.thanks to marwanshawi, by using translation pattern, my inbound calls hears a dial tone. but now i face anotherproblem for routing th...

Member Since	‎01-04-2010 09:58 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

loopstart FXO port ringing problem

Trouble with inbound calls in CUCM

Cisco Access Point 1231 and Android connection issues

Re: Trouble with inbound calls in CUCM

Re: Trouble with inbound calls in CUCM

Re: Trouble with inbound calls in CUCM