About Vincent Fortrat

Vincent Fortrat · 04-14-2016

Hello,I have a customer who has ISR 4331 and 4321 on branch sites. There is no UCS-E modules but we do have 200GB SSD storage and 8/16GB of RAM. In this configuration, is it possible and supported to run a low scale vWLC as a service container ?Thank...

Vincent Fortrat · 10-08-2015

Hello everyone,I recently deployed SFR module on ASA 5512-X and I am facing the following issue : One website that is used on a daily basis is blocked since we deployed FirePower services. Actually, it's been categorized as "Malware Site" with a bad ...

Vincent Fortrat · 01-03-2011

Hello,I'm working on implementing a RADIUS authentication for wireless access with the following :- PCs running Windows 7, protocol used is PEAP (without validating the server certificate to make it simple at first),- AP 1252 configured to use a RAD...

Vincent Fortrat · 07-06-2010

Hi,I just upgraded my ACS v4.0 to the latest available version v4.2(1) build 15 patch 2 and I've got some trouble with the CSLog service. I performed a successive upgrade first to v4.2 then to v4.2.1 and finally applied the two patches. Everything is...

Vincent Fortrat · 04-16-2009

Hello,I have a problem with an IPSec tunnel between a 877W router and a 1812 router. Configuration on both routers seems to be OK as soon as the tunnel is going up but goes down after a while. I get those logs :040687: *Apr 16 10:50:44.415 PCTime: I...

Vincent Fortrat · 02-23-2017

Thanks, I missed this note. I will try to stop by during the afternoon.Vincent

Vincent Fortrat · 02-23-2017

Hi Adam,I've just seen that APIC-EM 1.4 is out. Release note doesn't mention our use case, do you confirm that it is included ? I am @ Cisco Live so I don't have time to test right now. If you have time to meet at the DevNet Zone, tell me !Vincent

Vincent Fortrat · 01-13-2017

Thanks for the update Adam.I tried to change the configuration and only set the expected member count (2 in my case) in the stack switch configuration. But I have to at least accept the EULA otherwise I can't save my device. Seems to be the issue her...

Vincent Fortrat · 01-11-2017

Great ! Thanks Adam, let us know when you have an update. For the moment, I will try deploying the first switch in the stack as standalone, pre-provision the others and power them on when PnP is finished. Should work.

Vincent Fortrat · 01-10-2017

When I enable debug pnp all on the stack, I have these logs over and over :Jan 10 16:29:45.059: PNPA-inventory:Stacked switch udi[1]:PID:WS-C2960X-24PS-L,VID:V04,SN:FOC2030V0H4Jan 10 16:29:50.264: PNPA-infra: PKI Initialized[0]Jan 10 16:29:50.264: PN...

Member Since	‎11-04-2004 01:21 AM
Date Last Visited	‎04-09-2018 06:45 AM
Posts	55
Total Helpful Votes Received	20

User Statistics

User Activity

vWLC support on ISR 4321/4331

Security information on IP address or URL in Sourcefire

"24427 Access to Active Directory failed" error in ACS 5.1

CSlog service not starting on ACS 4.2 running on Windows 2003 Server

Error "Death by retransmission P1" with an IPsec tunnel between two routers

Re: APIC-EM and 2960 stacking switche

Re: APIC-EM and 2960 stacking switche

Re: APIC-EM and 2960 stacking switche

Re: APIC-EM and 2960 stacking switche

Re: APIC-EM and 2960 stacking switche