About Huexxx1977

Huexxx1977 · 02-26-2013

Hi all.I have a WRVS4400N at my office to have one VPN with our main client and also to manage all the small network.In two weeks more or less we are going to change our office to another place, merging two offices in one.At the new place we'll have ...

Huexxx1977 · 01-30-2012

Hi,we've buyed a WRVS4400N to create a IPSEC VPN tunnel to our client in order to access some applications.After a while trying to configure the router, we have archieved it and the VPN tunnel is up. We can see the tunnel up from here and from client...

Huexxx1977 · 01-20-2012

Hi,at our office we have a brand new WRVS4400N with 2.0.1.3 fw preinstalled.In order to make a VPN connection to our cliente, we need to establish an IPSEC VPN with AES-CBC encryption, but in the drop-down list I can only select 3DES.Does v2.0.2.1 fw...

Huexxx1977 · 01-20-2012

Hi,at our office we have a brand new WRVS4400N with 2.0.1.3 fw preinstalled.In order to make a VPN connection to our cliente, we need to establish an IPSEC VPN with AES-CBC encryption, but in the drop-down list I can only select 3DES.Does v2.0.2.1 fw...

Huexxx1977 · 03-25-2013

Hi all!I've solved the issue.The problem was on the 'other' net... because the pings weren't returned to sender.I've added a static route on the other net's router to my router and that's all.Thanks!

Huexxx1977 · 03-01-2013

Firstly thanks for your answer!This is not a solution IMHO because my Cisco WRVS4400N is working as default gateway of my LAN.If I switch router mode to Router, I'll lost my internet connection.I'll try again and check it a little bit more...Is it po...

Huexxx1977 · 01-30-2012

Hi all,I've implemented sucessfuly the tunne and I've archieved to put traffic on it...To archieve this, I've modified my local address to the range 10.148.145.96 / 27, and I've modified (in contact with my client) the remote range to 10.113.x.x to a...

Member Since	‎01-20-2012 02:13 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	7

User Statistics

User Activity

Problem with inter-VLAN routing... How to solve it?

WRVS4400N: VPN tunnel up but no outgoing traffic through it...

WRVS4400N and VPN connection over AES-CBC (256 bits)...

WRVS4400N and VPN connection over AES-CBC (256 bits)...

Problem with inter-VLAN routing... How to solve it?

Problem with inter-VLAN routing... How to solve it?

WRVS4400N: VPN tunnel up but no outgoing traffic through it...