Guys, I have two APICs running and now want to add third, how I can figure it out settings used at first setup (TEP Address, multicast address for BD, etc) at the momento im only able to get the infra vlan used in System / controllers or in bond0 ifa...
Hi all, I have a problem regarding configuration of certificates on ACE, I have one serverfarm with two realservers, those server runs three different domains on same VIP (Apache handle which one is presented to the user), we want to put https to tho...
Hi everyone, We are adding a second site and want to interconnect with primary (running FP on two 7010 boxes), we are going to have a 2x10G DWDM links to secondary which is going to get only one 7010 box. For DCI is best scalable OTV, but in this cas...
Hi guys, Currently we are deploying a CUCM solution, but on the customer side we are thinking in put a CME-SRST CPE, for this purposes the phones on customer side will register on CUCM but in a case of a WAN failure the local CME will act as SRST and...
Hi everyone,I'have a little problem, i cannot see if this is a loop.Imagine that:If all ports )including the trunks) are in the VLAN1 im seeing a loop! no?Ok, and imagine a second case:The two trunk ports (well are four ports but you understand, no?)...
Hi toshi,
Are hosts in same subnet? remember that IP classification needs diff subnet (traffic must be routed by the ALE in order to IP classification to work)
Maybe vlan classification + per-port vlan is what you need and in order to avoid the erro...
Hi mate,
Will try to reply you :), i guess you're meaning to the output of the "
show system internal eltmc info vlan brief
" command :
VlanId -> Platform Independent VLAN - It's a local identifier for VLAN and VXLAN IDs (meaning that could be dif...
Hi Vincent, in that case that was the other thing in my mind, order fir this operations _is_ KEY, and as TAC mentions thats the right order of operations, glad that you got an answer.
KR,
AL
Hi haidar,
Regardung: "Is it recommended to change this to a different Vlan on the VPC Peer-Link on our Nexus Cores, or do we just leave it as default Vlan 1?"
As you may know the best practice regarding not to use vlan 1 is for security purposes...
Hi v.graf,
As per doc: The switch with lower priority will be elected as the vPC primary switch. If the peer link fails, vPC peer will detect whether the peer switch is alive through the vPC peer keepalive link. If the vPC primary switch is alive, t...
