Hello,
I have a WLC9800 (OS 17.9.3) configured as new with the minisetup from the beggining of configuration.I want to use 2 subnets:192.168.10.0/24 (vlan 10) for management192.168.20.0/24 (vlan 20) for usersAt first setup, i have configured the ip19...
Hi,
I have a Cisco ASA FPR 1100 running with FDM. I had access via https. I have a vpn client profile, and i made some changes on Cisco Anyconnect vpn profile, meaning, that i have changed the local certificate with a public certificate, in orde...
Hi guys,
I have a 1702 AP that is connected to a wlc 2504 and works fine. I need to move the AP to a new controller, WLC-9800-CL with software version 17.3.6.
I have icmp and capwapp connectivity between AP and controller. This are the messages that...
Hello, I have WLC-CL_9800 in private cloud, OS version 17.6.4. I need to downgrade the OS to 17.3.6 because i need to join some 1700 and 2700 Access Points.
I have tried to downgrade the WLC via CLI and via Web, but after reboot, it keeps it`s origin...
Hello,
I have a VWLC controller with image version 8.10.181.0 with several access points already associate to it (model 1542 and 2700).
I want to add a 9115 Access point. This AP is unable to join, i have enough licenses.
AP ip: 10.1.1.2/16
Control...
Hello, seems that i have managed to gain access after rebooting the Cisco ASA. Access for https and ssh were there, just got stocked. Might be a bug or just they have to work in order to improve the GUI overall. Missed the old ASA....
Thank you @Rob ...
@Rob Ingram , are you sure this is the way to setup an ip address on the management interface ?
I have tried that first into a dcloud lab on a Cisco ASA firepower, and after that i lost conectivity to the device.
This is what i have setup, then no pi...
Hi Rob,
Thank you for you`re reply. In case i do not have an ip address setup on the management interface, can i setup an ip via CLI?
On data interface, it is setup, but i do not understand what it happend that i lost https access.Can i enable ena...
Hello Rich, first thank you for you`re answer. Yes, you are right, it does not make any sense static ip with the error that i had.Just that, the Access Point was already associated to a 2504 WLC. I have tried moving the AP, with no luck (with the err...
Hi, i have found a solution and it worked.
I have created a DHCP reservation for the AP on the router.
ip dhcp pool AP1host 10.1.2.3 255.255.0.0client-identifier 022c.b02d.568d.b4default-router 10.1.2.1dns-server 10.1.2.10option 43 hex xxx.xxx.xxx ...
