Hi ! I'm getting problem in retrieving the bills of IP phones. When I try to get the bill of month of May, it gives an alarm that data is available till 6th may. What can be the possible reasons and what settings should I change for getting the bills...
In my network, there are 22 VLANs on the nine 3500 series switches, and these switches are connected to the backbone 6509 switch. I got an ISDN internet connection on router 1603. The ethernet port of the router is connected to the switch 3548(one o...
I have one Cisco 1000 router in my lab, and suddenly one day it stopped responding. What can be the various causes? It is neither taking the ctrl-break, and nor booting from any mode. Sometimes it shows a single junk character '0', and most of the ti...
Dear Sir, I have four routers(say R1-2610, R2-2610, R3-2504 and R4-1600) in my lab, connected as following... R1 -->(s0/1)(192.168.1.0)(s0/0)--> R2 R1 -->(e0/0)(192.168.2.0)(e0) --> R4R2 -->(s0/1)(192.168.3.0)(s0) --> R3R2 -->(e0/0)(192.168.4...
Hi,In my poing of view, the interpretation of the statement "The access list shd be put closer to the packet source" is different. Actually, it is talking closer in terms of router, not in terms of interfaces. If you read first line of page 508, it s...
Yes, I'm able to ping the public sites by name.. say ping cisco.com...the configuration for NAT is as following :interface Ethernet0 ip address 192.168.0.105 255.255.255.0 ip access-group 10 in no ip directed-broadcast ip nat inside!....................
The diagram is not coming properly, I try to explain that diagram in words...The s0/1 port of R1 is connected to s0/0 port of R2.e0/0 port of R1 is connected to e0 port of R4, through Hub.The s0/1 port of R2 is connected to s0 port of R3.The s1 port ...
