About richard.pugh

richard.pugh · 03-23-2011

Looking for documentation that details the configuration steps needed to configure Port Channels and Trunking on a Cisco Catalyst 4500 and other Catalyst models to support the UCS 6100 Ethernet Uplinks. I have found all kinds of documents on creating...

richard.pugh · 09-28-2016

Thank you for your submission. This workflow works sometimes but not all as I am receiving an error. Here is the error from the log; "Sep 28, 2016 16:39:02 PDT Error occured at line # 278Sep 28, 2016 16:39:02 PDT [Line#278] var netComment = jsonRespo...

richard.pugh · 04-20-2013

Negative, you just need to slide the disks out of the blade a little. Another option is to possibly create a bios policy and see if there is a setting to turn off the LSI controller.

richard.pugh · 04-20-2013

The issue is that the "No Local Storage" setting in the policy is looking for a blade with no local storage. You can create a raid set if there are still local drives in the blade. In order to boot from SAN you just need to make sure your Boot Policy...

richard.pugh · 12-18-2012

Should be 2 from FI-A to DCX1 and 2 from FI-B to DCX2Sent from Cisco Technical Support iPhone App

richard.pugh · 08-26-2012

No, it is not possible for just an FC port to be configured with an expansion module on the 6120. This is only possible by using the unified ports on a 62xxSent from Cisco Technical Support iPhone App

Member Since	‎04-03-2006 05:13 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	28
Total Helpful Votes Received	10

User Statistics

User Activity

Ethernet Trunk Setup on 4500 to support UCS

Re: Infoblox Integration. (via custom tasks).

No local storage for SAN Boot

No local storage for SAN Boot

Re: esxi vnics, vhbas

Re: Is it possible to have FC SFP in fixed ports on FI6120XP?